Roto-Jet Hose Washer Manual

2 min read

INSTALL & USE MANUAL 2025: See Attached Document
CIRCUL-AIR ROTO-JET HOSE WASHER

For Models:
200A

Abstract: Circul-Air Roto-Jet Hose Washer Manual (Model 200A) #

Product: Circul-Air Roto-Jet Hose Washer
Model: 200A
Manual Revision: June 19, 2025
Use Category: Fire Hose Washing System


Overview #

The Circul-Air Roto-Jet is a purpose-built, semi-automated washer designed to clean fire hose lengths efficiently and uniformly. It features a brush-assisted scrubbing chamber, immersion tank, and wringer rollers for controlled and continuous hose washing. Ideal for small to large fire departments, the Roto-Jet supports hose sizes from 1″ to 5″ and processes hose at approximately 30 feet per minute.


Specifications & Utility Requirements #

  • Electrical: 110–120V, 1-phase, GFCI outlet
  • Water Supply: ¾” garden hose fitting (backflow prevention required for potable lines)
  • Drainage: Gravity drain or optional 1¼” female coupling for custom plumbing
  • Construction: Rollers, nylon brushes, adjustable immersion guides, foot pedal control
  • Throughput: Approx. 30 ft/min hose processing rate

Key Features #

  • Spring-Lifted Top Roller: Handles 3″ and smaller hose couplings
  • Adjustable Immersion Basket: Supports dual-roll soaking for workflow efficiency
  • Foot Pedal Control: Ensures consistent wringing speed and safe operation
  • Tank Guides: Adjustable for hose diameters between 1” to 5”
  • Wash & Rinse Action: Uses both detergent bath and high-pressure nozzle rinse
  • Turntable Compatibility: Designed to integrate with Circul-Air Tilt Top Turn Table (sold separately)

Maintenance Summary #

  • Every 3 Months: Lubricate bushings, grease drive bearings, inspect keystock and gear set screws
  • Every 6 Months: Check belts, chains, sprockets for wear and tension
  • Annually: Inspect brushes, cords, bushings, and tighten all setscrews

Common Service Parts #

Includes service codes for:

  • Upper/Lower Rollers
  • Nylon Brushes
  • Belt A50
  • Gear Assemblies (12T–36T)
  • Brush Bearings
  • Idler and Drive Gears

Safety Notes #

  • Disconnect power before servicing
  • Only connect to grounded outlets
  • Do not operate around children
  • Avoid contact with moving parts
  • Always shut off water and drain tank after use

Integration Suggestions #

  • Recommended Drying Pair: Circul-Air PPE Express or Dual Purpose Drying Cabinet
  • Use Case: High-volume departments, training centers, and rural stations with limited drying infrastructure

Updated on 2025-07-30

What are your feelings

  • Happy
  • Normal
  • Sad